Residential - Accessory Structures

Planning on Building an Accessory Structure on your Property?

WHAT TO BRING

1. Site Plan (a dimensioned drawing showing property boundary dimensions, existing and proposed buildings and improvements, dimensions of all buildings, and distances or setbacks from buildings to property lines). Example.
2. Name, address, and phone number of property owner and contractor. Be sure you are aware of any easements, including utilities, that may be on your property. JULIE may be contacted at 811 if you are in need of assistance.
3. Completed Accessory Building Permit Application.

Building permits for this type of construction are generally issued while you wait.

WHAT FEES TO EXPECT

Building Permit Fee:

$40 filing fee plus $2 for every $1,000 in estimated construction value for each accessory structure permit that requires up to two (2) inspections. $65 filing fee plus $2 for every $1,000 in estimated construction vale for each accessory structure permit that requires three (3) inspections. If construction commences without a valid building permit, the above fee shall be doubled. Only property owners or an authorized agent can sign the permit application.

Zoning Setback and Size Requirements - Accessory Structure Residential

SIZE REQUIREMENTS

The aggregate ground floor area of all accessory structures on any single lot up to ½ acre in size shall not exceed the lessor of: 1) 1,200 square feet; or 2) the ground floor area of the principal structure on the property. The aggregate ground floor area of all accessory structures on any single lot greater than ½ acre in size shall not exceed the following limitations: 1) lot size up to 1 acre = 1,600 square feet; 2) lot size larger than 1 acre up to 2 acres = 2,000 square feet; and 3) lot size larger than 2 acres = no limit. Note on Total Lot Coverage: Total lot coverage for all structures (includes the principal structure) on the property cannot exceed 40% in the R-1 zoning district and 60% in the R-2 zoning district.

SETBACK REQUIREMENTS

It is the owner's responsibility to notify the City during normal business hours, at least one (1) business day (twenty-four hours) in advance of the following phases of construction:

INSPECTIONS

• Prior to pouring concrete or setting block for the foundation and prior to backfill. Principal items to be inspected include the setbacks, footing and foundation widths and depths, reinforcing steel, and foundation drainage.
• Prior to covering over the framing and roughed-in electrical and plumbing. Principal items to be inspected include the frame, floor joists, firestopping, roof trusses, and roughed-in electrical wiring (minimum 12 gage per City Ordinance), circuits and grounding, and roughed-in plumbing. This inspection is done prior to exterior siding installation.
• Upon completion of the building or structure and before the issuance of the Certificate of Occupancy. Principal items to be inspected include a final check of the structure, interior and exterior walls, roof, operability of fixtures and equipment, final electrical inspection of conductors, lighting and receptacles, circuits, water meter installation, and final plumbing inspection.
  
  

INSPECTION REQUIREMENTS BASED ON TYPE OF CONSTRUCTION

Copies are available for review at City Hall. Inspections focus only upon the work which is the subject of the Building Permit. Inspectors will review the building to determine compliance with the 2018 International Residential Code.